12:00 and blinking 12:00 are not the same. :)
post
House came with a builtin over/microwave combo.
Ohh wifi option... FUCK THAT... NO FUCKING WAY I'LL ADD THIS POS TO MY WIFI
Clock is WAY wrong, scroll through settings and update it to the second.
Next day, Clock is off by 1m... maybe I didn't do it right
Next day, Clock is off by 2m
Next day, 3 minutes, jesus that's a lot of drift.
OK fuck this thing, go through settings to turn the clock off.
THERE IS NO SETTING FOR THAT
So I can:
A. Leave the clock ever wrong where it'll be right like once ever couple months
B. Set the clock every couple days
C. Create a internet only + isolation VLAN and put this POS into it.
Simple fix: use a strip of electrical tape over your eyes
I wonder if the clock is intentionally that bad as a way to annoy its victims users into giving it an internet connection
it might be, but the interface is also slow as balls
First you hit microwave (because it operates both the mirowave AND the oven
The chime is instant but the menu load, that takes a good 700 ms
then you press cook, there's a menu of 4 items which are all just cook with extra steps. that's another 700ms and a 50% chance of not registering your click.
you get a horizontal two line number pad 1-5, 6-0 with a little hit box in the lower left for power
you enter in 90 for seconds, and click power (optional)
i shit you now, power is a scrolling slider, you swipe left and right to up up and down by 10%
micro->cook->9 0 -> power -> swipe90, ->swipe 80, swipe 70, swipe 60, swipe 50, swipe 40 -> next -> start
The other menus are worse, it starts asking you questions about the thing it's defrosting, satisfying some form of flow chart inside to do a lookup of power and time.
the only good thing I can say about it, it' has a proper popcorn button that stops early when the corn stops popping. It's never burned a bag or left extra kernels.
D. Tape a small mirror to the clock display, then set up a working clock across from it. Then learn to read mirrored numbers. Easy.
get a smart plug and power cycle every night at midnight
Fuck, it's 220 50amp ... But that's not impossible.... Take my upvote
Smart fuse?
I probably marry an ESP 32 to an industrial relay. Let my home assistant handle it because it's time from actual time servers.
The only problem I could think that would need to be handled is if I were having to be trying to cook something at midnight. Maybe detect power on the line, If it's wrong more than standby current cancel the restart for the day.
And then the smart plug begins to time drift....
No big deal, just set the time back to midnight every few days. Problem solved.
If by some miracle the clock is not also the timer display, you could use the Klick&Klack method.
Why would you do it at noon? It should be midnight.
Edit: duh, I realise now it's a shitty LPT.
I don't understand why this attitude persists now that VCRs are gone. If you've never set up the time and record time on a 6digit LCD, then you don't know the struggle.
At least on VCRs you could enter the time with the digit buttons on the remote. Whereas on digital alarm clock/wristwatch, if you hold the time up button a split second too long, you roll past the actual time and have to try again.
Most digital clocks default to midnight, actually.
Real LPT, if you get a clock, get one with radio syncing functionality so it will automatically get the time. My wrist watch does this and it's cool
all 31 comments