▲ 511 ▼ Print failed successfully! (lemmy.world) submitted 2 years ago by spckls@lemmy.world to c/3dprinting@lemmy.world 37 comments fedilink hide all child comments Turned on retraction speed to 11 and i guess it wore down the filament at one part but then managed to push it after some 10 minutes of spaghetti 👌
[–] spckls@lemmy.world [S] 9 points 2 years ago This was max acceleration / max speed test, it’s a 30mm cube (scaled) permalink fedilink source parent
