130
Making a toy rocket (lemmy.world)
submitted 4 days ago by to c/woodworking@lemmy.ca
42 comments fedilink hide all child comments
 

My toddler is obsessed with rockets at the moment, so I decided to use an extra length of dowel to make him a sturdy one.

I'm currently brainstorming the best way to attach the fins, figured I'd see if anyone here had any ideas

Currently, I'm thinking of cutting perpendicular grooves from the bottom that the fins will slot into, with each pair of fins being a solid piece. But keep in mind I haven't made the fins yet, so that's definitely not set in stone.

Modeling after the v-2 because it looks as stereotypical as a rocket can

you are viewing a single comment's thread
view the rest of the comments
[–] [S] 1 point 4 days ago (1 child)

I'm torn, because I'm planning on sizing the fins and orienting the grain in such a way so he HOPEFULLY won't be able to break them

But I know that's very very optimistic. Your take is realistic

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 1 point 4 days ago (1 child)

    I have to admit, my perspective is informed by building and flying Estes model rockets (the kind with the thin balsa fins and the cardboard tube fuselage). The odds of one of those things surviving landing with all the fins intact is, shall we say, not high, even if your parachute doesn't fail. Of course, those can't be made with the fins penetrating into the fuselage because you need a cavity for the engine to fit into, so it's a little different.

    I suppose if you make the fins thick enough (since it doesn't have to fly), they might be durable enough to be through-mounted and still survive a toddler.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •