507
Dutch authorities allegedly seize VPN server without a warrant — company claims that law enforcement will return it after analyzing the device fully (www.tomshardware.com)
submitted 6 months ago by to c/technology@lemmy.world
64 comments fedilink hide all child comments
 

The authorities apparently got tired of asking and just went in themselves.

Canada-based Windscribe, a VPN provider, just said that one of its European servers has been allegedly seized by Dutch authorities without a warrant. According to the company’s post on X, law enforcement said that they will return it to the service provider after they “fully analyze it.” It’s unclear why law enforcement impounded just a single rack from Windscribe’s cabinet, but the VPN provider said that it only uses RAM disk servers, meaning anyone who would look through the installed SSDs would only find a stock Ubuntu install on it, so the servers shouldn't hold any trackable data.

you are viewing a single comment's thread
view the rest of the comments
[–] 4 points 6 months ago (2 children)

This probably works in the UK and US. Rest of Europe, not so much unless you gently strip the cable which is pretty dangerous.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 4 child comments
    •
  • [–] 3 points 6 months ago

    It's not that dangerous. They make strippers that will only take off the outer insulation, and then you can use vampire taps on the wires.

    Or you might be able to pop the case and jump the power on the DC side. You could easily do that on an ATX power supply, but servers are a little more complicated, because hotplug PSUs use wafer connectors instead of molex plugs.

  • permalink
  • fedilink
  • source
  • parent
  • [–] 3 points 6 months ago

    I just read the manual for the Euro version; basically, they assume you take the power strip/PDU with the computer.

    So, you plug the special UPS into a spare outlet on the PDU; it monitors the power supply, and as soon as power from the PDU drops it jumps in and starts supplying. So plug into an outlet, then unplug the PDU from power, and the UPS takes over. Since at this point the pins on the PDU plug are live, they provide a safety cap to put over the end of the cable. The computer itself is never unplugged.

  • permalink
  • fedilink
  • source
  • parent