255
IKEA moves to Thread (and away from Zigbee) (www.theverge.com)
submitted 1 year ago by to c/homeassistant@lemmy.world
112 comments fedilink hide all child comments
you are viewing a single comment's thread
view the rest of the comments
[–] 6 points 1 year ago (1 child)

So, if I'm invested in zigbee, but want to future proof, I should consider threads/matter, and a hub that talks to both?

Can home assistant do that?

  • permalink
  • fedilink
  • source
  • hideshow 2 child comments
    •
  • [–] 6 points 1 year ago (4 children)

    Yes if you have a Zigbee and a Thread antenna module connected to your HA instance you can run it as an Zigbee and Matter hub and connect Zigbee and Matter devices. A cheap antenna module is the Sonoff ZBDongle-E. You can flash the firmware of it and turn it into a Thread antenna module. It can also run as a Zigbee and Thread antenna simultaneously, but I never got that working properly. So I just bought two dongles. One for Zigbee and the other for Matter.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 8 child comments
    •
  • [–] 1 point 1 year ago (1 child)

    I only just bought a zigbee USB antenna, and 4 smart plugs. You're saying I need a second USB antenna dongle for thread?

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 1 point 1 year ago

    Yeah you need a separate dongle. The ZBDongle-E from Sonoff is pretty cheap on AliExpress. Cheaper than the official Home Assistant ZBT-1 dongle Nabu Casa sells. Unfortunately running both Zigbee and Thread on one antenna doesn’t work very well even with the dongle from Nabu Casa.

    Only thing with the ZBDongle-E is that you need to flash it yourself to run OpenThread via this website https://darkxst.github.io/silabs-firmware-builder/ it’s not hard though.

  • permalink
  • fedilink
  • source
  • parent
  • [–] 1 point 1 year ago (1 child)

    Hows that working software-wise in HA? One running in Z2M, the other ZHA?

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 1 point 1 year ago (1 child)

    I'm not running Z2M and ZHA together though. Just ZHA and Matter. But I've read that running Z2M and ZHA with two dongles is no problem in HA you just have two separate networks

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 1 point 1 year ago

    Remembered I have a Conbee III laying around so I flashed it to the OpenThread firmware. Turns out, HA itself handles the devices (you add matter devices in HA settings) and the Conbee is really just the antenna. So no container like Z2M or deconz in the middle. That makes a whole different situation than I assumed above. Documentation was not intuitive but I got it going for me, which is nice

  • permalink
  • fedilink
  • source
  • parent
  • [–] 1 point 1 year ago

    You can flash the SLZB-06 to use Matter over Thread too. I like those because they use Ethernet and can be powered via PoE, so you can put them practically anywhere you can reach using an Ethernet cable.

  • permalink
  • fedilink
  • source
  • parent