27
New Elegoo Mars 3 - any advice for getting into resin (lemmy.world)
submitted 2 years ago by to c/3dprinting@lemmy.ml
12 comments fedilink hide all child comments
 

Here is my brand new (second hand) Elegoo Mars 3 printer.

I've had some experience with FDM but this is my first time with resin.

Current progress:

  • Brought a VOC face mask and nitrile gloves. Do I need UV glasses?
  • ordered soy based resin and a wash/cure station
  • installed and found chitubox slicer isn't great
  • don't understand plug drilling and hollowing
  • plan to paint mimi's from it. Advice on painting resin?

I know some of this is basic but I felt it might promt interesting conversation.

you are viewing a single comment's thread
view the rest of the comments
[–] 4 points 2 years ago (1 child)

You can mix in a product like Tenacious resin to give them a little more flexibility to resist breaking

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 3 points 2 years ago (1 child)

    As in mix resins? Do you have any more info on this? I'm interested.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 4 points 2 years ago (1 child)

    Yes. You can mix it into “normal” resin to give additional toughness to the parts. It helps with small features that might require more delicate handling normally. I’ve used it at like 20-30% for stuff that needs just a little give, all the way up to like 80% for stuff that needed to be fairly flexible.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •