I moderate a community that requires me to add a reason on why the posts were removed. It would be nice to have this option in Summit, so I don't have to go into the Lemmy web interface every time.

cross-posted from: https://lemmy.ca/post/10949982

GAMIN HEADSET

cross-posted from: https://sopuli.xyz/post/5905929

So, I have this 12V LED Strip (not RGB) and I want to power it using my PCs power supply. I also have an old case fan with this Molex connector on the back, which should give access to 12V according to the pinout.

My plan, as you might have guessed, is to cut off connector with some cable overhang, isolate the ends on the fan side, and solder some extension wires (probably speaker wire) to the Molex connector wires.

If I now connect that wire to the LED strip, taking care to connect the ground to - and 12V to +, it should just work, right?

Are there any risks I have to watch out for? My power supply is a 600W supply, so it should have plenty of power for the LEDs. I'm 99% sure this plan should walk flawlessly - but I want to ask you guys first so I don't burn my house down.

cross-posted from: https://programming.dev/post/5891959

I can't be the only one who experienced this more than once

https://lemmy.ml/post/7539708

Oh look, it's that weird glowing thing you can see in the night

Shot with Kodak Pixpro AZ401, colours slightly edited in GIMP

Disclaimer; I'm not at all a professional, just someone who bought a 40x zoom camera a while back.

Can I get uhhhhh... Intel Boot Agent with mayonnaise, please?