25
My H150 has arrived and I like it! (feddit.de)
submitted 3 years ago by to c/flashlight@lemmy.world
8 comments fedilink hide all child comments
 

Well, except that a flat-top battery will cause a short circuit...

all 8 comments

sorted by: hot top controversial new old
[–] 3 points 3 years ago* (last edited 3 years ago) (1 child)

I hope that they can recover from this and repair all the lights that were already produced. The performance was excellent in TacGriz’s review so it’s clear the driver quality is much higher than Acebeam H16. Safety is kind of important though 😀

  • permalink
  • fedilink
  • source
  • hideshow 2 child comments
    •
    • [–] 2 points 3 years ago (1 child)

    Now I'm wondering. I know these signs are used in Belgium but are they used in other countries too?

  • permalink
  • fedilink
  • source
  • hideshow 2 child comments
    •
    • [–] 2 points 3 years ago (2 children)

    On the M150, it’s possible to desolder the RPP. Can you do that on the H150 as well?

  • permalink
  • fedilink
  • source
  • hideshow 4 child comments
    •
  • [–] [S] 1 point 3 years ago

    Probably yes, if you were able to unscrew the head (they use very good glue). Also there are several other components at the battery side of the driver. Lastly there's always the chance other components fall off from the heat, maybe at the back side.

    So yes, it's possible, but difficult. The good thing: You don't have to worry about it, Skilhunt is recalling the H150 and will exchange them for a fixed version!

  • permalink
  • fedilink
  • source
  • parent