37
Help Identify This Connector (discuss.tchncs.de)
submitted 2 years ago* (last edited 2 years ago) by to c/askelectronics@discuss.tchncs.de
18 comments fedilink hide all child comments
 

Hello Ask Electronics community, please help me identify the name of this connector.

For context, this is from a motor scooter: Yamaha Mio M3 125. This socket connects the ECU to the wiring harness.

I wish to know how to open this socket to access the rubber/silicone seal inside, and to know that first I need to identify the name of this connector.

So anyone know what is the name of this connector?

Something like "Superseal 24-pin" or so. Also, to clarify: I am not searching for replacement part for this connector. I only need to know the name.

Here are some more pictures of the connector (hover above the picture to see alt-text).

(None of the pictures are mine, I just copied them from the internet).

you are viewing a single comment's thread
view the rest of the comments
[–] 4 points 2 years ago (1 child)

This seems to be a proprietary connector, so I'm not sure if there's an ISO standard designation (like DE9 or RS232). Mouser has these listed as SICMA Sealed Full Interconnect.

Here's a datasheet. Good luck!

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 4 points 2 years ago

    Here’s the important part of your looking to re-pin this type of connector:

    Aptiv Sicma Interconnect Sealed Headers are offered in 6, 24, 56, or 90 cavity count (ways) in 1, 2, or 3 rows with 1.5mm, 2.8mm, or mixed cavity configurations.

    Looking at Delphi 1.5 or 2.8 connectors might get good results too.

  • permalink
  • fedilink
  • source
  • parent