441
iFixit wants to fix the soldering iron (www.engadget.com)
submitted 2 years ago by to c/technology@lemmy.world
126 comments fedilink hide all child comments
you are viewing a single comment's thread
view the rest of the comments
[–] 2 points 2 years ago (2 children)

Of course it does, I was talking more about price than repairability.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 4 child comments
    •
  • [–] 5 points 2 years ago (2 children)

    Just curious what do you think a reasonable price would be for this product?

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 4 child comments
    •
  • [–] 6 points 2 years ago (2 children)

    A pinecil is 25$ and a 40kmah battery pack is 35$, so the combination... 60-70 bucks.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 4 child comments
    •
  • [–] 3 points 2 years ago (1 child)

    I've never used one but I just looked up the specs and it looks like it maxs out at 75 watts. Is that enough to keep it hot with like 16 gauge wires?

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 1 point 2 years ago (1 child)

    The pinecil will go up to 126w if you have a capable power supply. I am going to be honest though, 16awg isn’t that large. A 45w iron could probably handle that fine if you are ok with waiting a but for your wires to get up to temp.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 1 point 2 years ago (1 child)

    I have a 60w iron and 16awg is always the size that's just too big for me and always a pain to solder.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 1 point 2 years ago (1 child)

    Is it actually a 60w iron or does it only hit that current when heating from roomtemp and not when keeping the tip on temperature?

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 2 points 2 years ago*

    A traditional soldering iron in my nation costs about PHP 450 (about USD 7.95). The portability, accelerometer, temp control, easy repair and the ability to solder while charging a phone are 👍, but USD 250 is so high.

  • permalink
  • fedilink
  • source
  • parent