submitted 2 years ago* (last edited 2 years ago) by to c/linux@lemmy.ml
 

As the title says, my bootable usb is not showing up in the boot menu for my ThinkPad e14 AMD ryzen 5 7530u , gen 5 I think. I have disabled secure boot in the uefi and disabled fast startup in windows. Am I missing anything ? Note: this is my first time using a uefi bios so I don't know if there are any other kinks to mess with .

Edit : I contacted lenovo support for the above issue but even they couldn't find the answer so I guess won't be using linux for this laptop. But since it's for uni I guess it's fine. I will just use WSL

Edit 2: Reinstalled the bios , the usb boots now . Finally slapped opensuse on it and now running it

you are viewing a single comment's thread
view the rest of the comments
[–] 3 points 2 years ago (1 child)

I have basically the same laptop (it's an E16, but with the same CPU - it's just the 16-inch version of your laptop). Make sure you press enter, press F1 to go into BIOS, then go into Security > Secure Boot and enable "Allow Microsoft 3rd Party CA". That worked like a charm for me.

If you're still having problems, try writing down the steps you have taken (down to the key combinations; some pictures would be nice as well). I should have all the same settings menus.

Don't worry, though, you've made a good choice; I've been loving my Thinkpad E16.

  • source
  • hideshow 2 child comments
  • [–] [S] 2 points 2 years ago (1 child)

    I tried that as well the thing is the usb does not show up in the menu

  • source
  • parent
  • hideshow 2 child comments
  • [–] 2 points 2 years ago (1 child)

    Weird. What distro is on it, what program did you flash it with, and does it show up in the file manager on another machine?

  • source
  • parent
  • hideshow 2 child comments
  • [–] [S] 2 points 2 years ago* (1 child)

    The first was the ventoy one with mbr which I was fine other machines I have used it before with. It had like endeavour os , opensuse, pop os , linux mint windows 11 etc...

    But I also reformatted it with windows 11 from meda creation tool as well to check but that also doesnt work which is the most strangest part

  • source
  • parent
  • hideshow 2 child comments
  • [–] 1 point 2 years ago (1 child)

    Could MBR be your problem somehow? Maybe it needs to be a GPT table instead.

  • source
  • parent
  • hideshow 2 child comments
  • [–] [S] 2 points 2 years ago (1 child)

    In the top comment you could see I tried reformatting with gpt as well that was also not working

  • source
  • parent
  • hideshow 2 child comments
  • [–] 1 point 2 years ago (1 child)

    Could you record a video showing the steps you take to try to boot the USB?

    Also, maybe pictures of any BIOS settings. I want to see if I can replicate the problem on my laptop.

  • source
  • parent
  • hideshow 2 child comments
  • [–] [S] 1 point 2 years ago* (3 children)
  • [–] 1 point 2 years ago (1 child)

    These settings seem exactly the same as mine in all significant ways. Can you show me a picture of Config > USB?

    Also, what's the partitioning on your laptop like? Have you actually set up Windows, or have you just left it in OOBE mode for now? On my E16, I just put in a second drive and haven't even touched Windows yet.

    Also, when I get time today, I might try replicating your steps with Ventoy to see what happens. Have you just tried straightup flashing an image? (If you haven't, probably try something like OpenSUSE or Debian, which tend to have better EFI support on their installers.)

  • source
  • parent
  • hideshow 2 child comments
  • [–] [S] 1 point 2 years ago (1 child)

    I have completed the windows setup with the usual 3 partition and I used Ubuntu as well but booting is not the problem, the bios just doesn't seem to pick up the pendrive

  • source
  • parent
  • hideshow 2 child comments
  • [–] 2 points 2 years ago (1 child)

    Okay. What does your Config > USB look like?

  • source
  • parent
  • hideshow 2 child comments
  • [–] [S] 1 point 2 years ago (1 child)

    Power through usb and the same on battery

  • source
  • parent
  • hideshow 2 child comments
  • [–] 1 point 2 years ago (1 child)

    Have you tried completely resetting all BIOS settings?

  • source
  • parent
  • hideshow 2 child comments
  • [–] [S] 1 point 2 years ago (1 child)
  • [–] 1 point 2 years ago (1 child)

    The last thing I would try is seeing if you can update/revert the firmware on this thing.

    If not, then I think I might be out of ideas unless you happen to have a KVM switch that can stream over le intwerbz.

  • source
  • parent
  • hideshow 2 child comments
  • [–] [S] 1 point 2 years ago (1 child)

    How do you reset the firmware ?

  • source
  • parent
  • hideshow 2 child comments
  • [–] 1 point 2 years ago (1 child)

    That's something you'll have to Google, but there should be a tool in Windows (you might have to install it from OEM website if you've reinstalled to debloat).

  • source
  • parent
  • hideshow 2 child comments
  • [–] [S] 1 point 2 years ago (1 child)

    Tried that as well but that as well uses usb boot so that is also net detecting

  • source
  • parent
  • hideshow 2 child comments
  • [–] 1 point 2 years ago (1 child)

    Can you try Boot mode on anything other than "quick", and then F12 during boot see if that works?

  • source
  • parent
  • hideshow 2 child comments
  • [–] [S] 2 points 2 years ago (1 child)

    The only other option is diagnostics that also doesnt work

  • source
  • parent
  • hideshow 2 child comments