6
Sbc for print and scan server (lemm.ee)
submitted 2 years ago by to c/selfhost@lemmy.ml
6 comments fedilink hide all child comments
 

Hello, i have a printer and scanner connected to a rpi 3b+ so everyone (at home) can access them through wifi.

Now the scanner is a CanoScanLide 400, which is powered though USB. This didn't seem to be an issue with the raspberry, but recently i had to re-plug everything and now the scanner isn't turning on with the raspberry anymore.

Does anyone have a suggestion for something low cost that is similar in size and power consumption and can support a usb powered device?

(Ideally also with wifi 5ghz, since this is the last device connected to the 2.4ghz)

you are viewing a single comment's thread
view the rest of the comments
[–] 3 points 2 years ago (1 child)

If the scanner was working fine with the Pi before, I would suspect the USB cable or power supply. Try a different power supply and cables. The Raspberry Pi 3B+ can supply 1.2 amps from its USB ports which is sufficient for 2 bus powered devices. A powered USB hub can be used if you need to connect more bus powered devices to the Pi.

  • permalink
  • fedilink
  • source
  • hideshow 2 child comments
    •