19
Anduril 2 (Multi-channel) - Momentary Turbo 3H/4H don't work (lemmy.world)
submitted 3 years ago* (last edited 3 years ago) by to c/flashlight@lemmy.world
15 comments fedilink hide all child comments
 

Hi Anduril user's !

I noticed that the momentary turbo does not work for 4H from the "ON" state (3H for those who do not have tint ramping).

To fix it, I have to comment out line 423:

if (! arg) { // first frame only, to allow thermal regulation to work

[https://bazaar.launchpad.net/~toykeeper/flashlight-firmware/multi-channel/view/head:/ToyKeeper/spaghetti-monster/anduril/ramp-mode.c#L423

Do you have the same behavior?

Thank you and good day

you are viewing a single comment's thread
view the rest of the comments
[–] [S] 1 point 3 years ago (1 child)

Also in following the code style the actual statement would also need to include an IFDEF for multi-channel-config but maybe not necessary for you test locally?

So Mementary Turbo 3H work for you? If you don't own multi channel, MT should be 3H from ON. I think l423 be identical for simple or multi channel.

I can't find where arg should be equals to 0... steady_state always call with arg <> 0

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 1 point 3 years ago (2 children)

    Sorry for the extraneous information about the ifdef. The important part was whether adding this extra check would fix the bug in the same way as deleting the original line did.

    I can’t find where arg should be equals to 0… steady_state always call with arg <> 0

    From what I could assume in the comments, this refers to the very first state in that steady-state (“first frame”) right when you have done 4H. Then it sets the current level to the appropriate turbo (set_level_and_therm_target).

    Your bug would be that it never set the level to turbo because it never executed set_level_and_therm_target because ! arg evaluates to false.

    Your bug fix was to delete the check, but that means that every instant it will keep trying to set the level to turbo instead of just setting it during the first frame and then maintaining the steady-state.

    My potential fix was to add something so that the statement if (! arg) || (! channel_has_args(cfg.channel_mode) would evaluate to true during the first frame so it can then call set_level_and_therm_target exactly once.

    @SammysHP@feddit.de (if you have a moment) does this seem close to the mark?

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 4 child comments
    •
  • [–] [S] 2 points 3 years ago (1 child)

    | (! channel_has_args(cfg.channel_mode)

    I test that asap. I already try to comment it and it's work fine :

    //if (! arg) {  // first frame only, to allow thermal regulation to work
    uint8_t tl = style_2c ? 150 : turbo_level;
    set_level_and_therm_target(tl);
//}

    But I am surprised that the functionality appears in the diagram and that no one remarks that it does not work (3H without Multi channel or 4H with) https://lemmy.world/post/1038159

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •