19
what are the realistic requirements for opnsense? (lemmy.ca)
submitted 3 years ago* (last edited 3 years ago) by to c/selfhosted@lemmy.world
19 comments fedilink hide all child comments
 

I'm a pretty novice person considering installing opnsense for my personal home use.

Their documentation has what would seem to be incomplete hardware requirement.

For example it does not list any network hardware. I assume you need at least 1 Ethernet connection. I recall reading somewhere that you might need 2 network cards? One for in and one for out?

What about network card specs? I have old computers lying around that exceed the CPU/RAM/SSD requirements but cards are practically antiques. Should I upgrade? If so, to what?

ETA: The best internet I could subscribe to where I'm at is 1024 Mbps down, 50 Mbps up. So don't worry about wasting fibre speeds. :(

Does anyone know about a more thorough description of requirements?

you are viewing a single comment's thread
view the rest of the comments
[–] 3 points 3 years ago (1 child)

You can buy multi-port Intel ethernet cards cheap on eBay. But a used one and drop it into your computer. If you stick to Intel you should have a better time with driver support under OPNsense, and it would enable you to have separate ports for VLANs if you wanted to get fancy.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] [S] 2 points 3 years ago (1 child)

    thanks! so for example: Intel Gigabit Dual PORT GIGABIT ETHERNET PCIe NIC Card EXPI9402PT NC360T which is CA$30. Does that sound right?

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •