117
It took over 2 years, but I finally finished my partially 3D Printable E-Reader Case (lemmy.world)
submitted 2 years ago by to c/3dprinting@lemmy.world
13 comments fedilink hide all child comments
 

Pictured is my Kobo Clara 2e with a laser cut leather cover hand stitched to the 3D Printed Parts and replaceable arms. So far I have the Kobo Clara 2e, Kobo Nia and the Kobo Clara HD designed. I've also made the parts available on

Thingiverse: https://www.thingiverse.com/thing:6340022

Printables: https://www.printables.com/model/662929

and the FreeCAD design files are on GitHub: https://github.com/the16bitgamer/16BitVirtualStudiosDesigns/tree/main/GLoA%20E-Reader%20Cases/6%20inch

you are viewing a single comment's thread
view the rest of the comments
[–] [S] 6 points 2 years ago (3 children)

Yeah, I am surprised that no-one ever bothered to do this before. I am hopeful that others find it and add their own e-readers to it, though I will be padding it out myself for what e-reader I have on hand.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 6 child comments
    •
  • [–] 2 points 2 years ago* (1 child)

    I thought about doing it once but decided that PLA/PETG is probably not a good material for the case as I was expecting it to break too easily. TPU probably would work well but I've mever printed it and don't have any. Also I don't have enough experience working with leather for something like this.

    The end result from me would have been a lot of spent time for a not very well made item

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] [S] 1 point 2 years ago

    I thought the same too, that is why the arms are not the same color as the plastics, they are removable. Meaning when they break they can be replaced.

    I've made arms out of both PETG and PLA, and while yes they broke, with the help of my SO, I refined the design so that they don't break. Our longest lasting arms thus far is between 4-6 months. It's taken a lot of refinement and subtle fillets and cuts to the model, but the arms hold up well, and the goal is for them to be better than a cheap case you get from Amazon, which I find breaks within 6 months to 1 year.

    While I think TUP would be an ideal material for this, so far with the adjustments I've made to the e-reader arms they've been both reliable and if you are kind to your devices, will hold up well, with the worse case that you can reprint them if they do break.

  • permalink
  • fedilink
  • source
  • parent