β² 245 βΌ RaspberryPi NAS problems be like (feddit.de) submitted 3 years ago by einfach_orangensaft@feddit.de to c/linuxmemes@lemmy.world 66 comments fedilink hide all child comments
[β] sirico@feddit.uk 5 points 3 years ago (1 child) M.2 sata to usb enclosure permalink fedilink source hideshow 2 child comments replies: [β] Snipe_AT@lemmy.atay.dev -2 points 3 years ago (2 children) I just bought this, we'll see how easy it is to setup. Do you still run raspian on it, or something else? permalink fedilink source parent hideshow 4 child comments replies: [β] bdonvr@thelemmy.club 2 points 3 years ago (1 child) Very easy. https://www.makeuseof.com/boot-raspberry-pi-4-via-ssd-network/ I used to run Fedora, now openSUSE on mine. permalink fedilink source parent hideshow 2 child comments replies: [β] Snipe_AT@lemmy.atay.dev -1 points 3 years ago (1 child) do you use a separate power for the sad? or just leave it plugged into the raspi? permalink fedilink source parent hideshow 2 child comments replies: [β] bdonvr@thelemmy.club 2 points 3 years ago No, it's a NVMe to USB-C enclosure, with a USB-A to C cable connecting it to the Pi. No external power. permalink fedilink source parent [β] Treczoks@kbin.social 1 point 3 years ago (1 child) I run ubuntu server on my RPi 4 with USB3 SSD. No issues so far, but needs a good PSU. Survived a blackout without an issue. permalink fedilink source parent hideshow 2 child comments replies: [β] Snipe_AT@lemmy.atay.dev -2 points 3 years ago (1 child) do you use a separate power for the sad? or just leave it plugged into the raspi? permalink fedilink source parent hideshow 2 child comments replies: [β] Treczoks@kbin.social 1 point 3 years ago No separate power, the USB3 SSD has only one USB-C connector, and draws a maximum of 250 or 300 mA under load for its nearly one TB. As the USB port is rated for 500mA, I'm quite safe. permalink fedilink source parent
[β] Snipe_AT@lemmy.atay.dev -2 points 3 years ago (2 children) I just bought this, we'll see how easy it is to setup. Do you still run raspian on it, or something else? permalink fedilink source parent hideshow 4 child comments replies: [β] bdonvr@thelemmy.club 2 points 3 years ago (1 child) Very easy. https://www.makeuseof.com/boot-raspberry-pi-4-via-ssd-network/ I used to run Fedora, now openSUSE on mine. permalink fedilink source parent hideshow 2 child comments replies: [β] Snipe_AT@lemmy.atay.dev -1 points 3 years ago (1 child) do you use a separate power for the sad? or just leave it plugged into the raspi? permalink fedilink source parent hideshow 2 child comments replies: [β] bdonvr@thelemmy.club 2 points 3 years ago No, it's a NVMe to USB-C enclosure, with a USB-A to C cable connecting it to the Pi. No external power. permalink fedilink source parent [β] Treczoks@kbin.social 1 point 3 years ago (1 child) I run ubuntu server on my RPi 4 with USB3 SSD. No issues so far, but needs a good PSU. Survived a blackout without an issue. permalink fedilink source parent hideshow 2 child comments replies: [β] Snipe_AT@lemmy.atay.dev -2 points 3 years ago (1 child) do you use a separate power for the sad? or just leave it plugged into the raspi? permalink fedilink source parent hideshow 2 child comments replies: [β] Treczoks@kbin.social 1 point 3 years ago No separate power, the USB3 SSD has only one USB-C connector, and draws a maximum of 250 or 300 mA under load for its nearly one TB. As the USB port is rated for 500mA, I'm quite safe. permalink fedilink source parent
[β] bdonvr@thelemmy.club 2 points 3 years ago (1 child) Very easy. https://www.makeuseof.com/boot-raspberry-pi-4-via-ssd-network/ I used to run Fedora, now openSUSE on mine. permalink fedilink source parent hideshow 2 child comments replies: [β] Snipe_AT@lemmy.atay.dev -1 points 3 years ago (1 child) do you use a separate power for the sad? or just leave it plugged into the raspi? permalink fedilink source parent hideshow 2 child comments replies: [β] bdonvr@thelemmy.club 2 points 3 years ago No, it's a NVMe to USB-C enclosure, with a USB-A to C cable connecting it to the Pi. No external power. permalink fedilink source parent
[β] Snipe_AT@lemmy.atay.dev -1 points 3 years ago (1 child) do you use a separate power for the sad? or just leave it plugged into the raspi? permalink fedilink source parent hideshow 2 child comments replies: [β] bdonvr@thelemmy.club 2 points 3 years ago No, it's a NVMe to USB-C enclosure, with a USB-A to C cable connecting it to the Pi. No external power. permalink fedilink source parent
[β] bdonvr@thelemmy.club 2 points 3 years ago No, it's a NVMe to USB-C enclosure, with a USB-A to C cable connecting it to the Pi. No external power. permalink fedilink source parent
[β] Treczoks@kbin.social 1 point 3 years ago (1 child) I run ubuntu server on my RPi 4 with USB3 SSD. No issues so far, but needs a good PSU. Survived a blackout without an issue. permalink fedilink source parent hideshow 2 child comments replies: [β] Snipe_AT@lemmy.atay.dev -2 points 3 years ago (1 child) do you use a separate power for the sad? or just leave it plugged into the raspi? permalink fedilink source parent hideshow 2 child comments replies: [β] Treczoks@kbin.social 1 point 3 years ago No separate power, the USB3 SSD has only one USB-C connector, and draws a maximum of 250 or 300 mA under load for its nearly one TB. As the USB port is rated for 500mA, I'm quite safe. permalink fedilink source parent
[β] Snipe_AT@lemmy.atay.dev -2 points 3 years ago (1 child) do you use a separate power for the sad? or just leave it plugged into the raspi? permalink fedilink source parent hideshow 2 child comments replies: [β] Treczoks@kbin.social 1 point 3 years ago No separate power, the USB3 SSD has only one USB-C connector, and draws a maximum of 250 or 300 mA under load for its nearly one TB. As the USB port is rated for 500mA, I'm quite safe. permalink fedilink source parent
[β] Treczoks@kbin.social 1 point 3 years ago No separate power, the USB3 SSD has only one USB-C connector, and draws a maximum of 250 or 300 mA under load for its nearly one TB. As the USB port is rated for 500mA, I'm quite safe. permalink fedilink source parent