28
New Convoy: S6 pocket thrower (lemmy.world)
submitted 3 years ago by to c/flashlight@lemmy.world
8 comments fedilink hide all child comments
 

New Convoy: S6 pocket “thrower” with 18350 titanium tube and Osram flat white CSLNM1 LED.

The extra few mm compared to an s2+ provides a longer reflector. The hotspot is a bit more concentrated than the smaller Lumintop fw1aa with the same emitter.

With the default 5 amp linear driver configured to group 8, 50% gets pretty hot after a minute or two. 35% in a different group might be more sustainable.

Overall I like this combination of aesthetics and functionality.

Also picked up the convoy AAA light which is surprisingly nice: stainless steel, 50 claimed lumens and a twisty which is tightly screwed in both the “on” and “off” positions, reducing the chance of accidental disassembly.

you are viewing a single comment's thread
view the rest of the comments
[–] [S] 1 point 3 years ago (1 child)

Agreed on the look even after a few scuffs since that picture. It was the least expensive way to try out titanium as well. Will probably end up with a full S2+ one of these days! Tons of choices for Convoy right now.

I heard about the S6 on one of the other sites (this thread I believe) and this emitter/host combination went on sale a month or so ago which led me to try it out.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 3 points 3 years ago

    That deeper textured reflector is really nice. Clean beam and smooth transition but plenty of throw. If you don’t mind the narrower field of view, it’s quite a versatile beam for near and far.

    I just put one together like yours but with 519a and the new buck driver!

  • permalink
  • fedilink
  • source
  • parent