28
Wtf is happening here? (sh.itjust.works)
submitted 2 months ago* by to c/3dprinting@lemmy.world
11 comments fedilink hide all child comments
 

I've printed hundreds of prints over a few years. Now I haven't printed in a few weeks but this is the first time I've had a problem like this. This is supposed to be flat. What's happening?

Bonus video: https://drive.proton.me/urls/74XZH4FVSM#1QqSvXK3MJCF

The audio might be a clue for you to help me troubleshoot

you are viewing a single comment's thread
view the rest of the comments
[–] 6 points 2 months ago (1 child)

Which pressure advance calibration do you use and why?

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 2 points 2 months ago

    I tried the ellis3d model and while I hadn't got all my start macros together, first time I ran it I crashed the nozzle into the bed and gouged it.

    Later attempts with a 0.6mm nozzle also gave me inconsistent and hard to read outcomes.

    Instead, I use this two box method on opposite corners of the front of the bed:

    https://forum.vorondesign.com/threads/how-to-confirm-your-pressure-advance-value-is-correct.23/

    Since then, coupled with the rest of the ellis3D tuning guide, my printer has been DIALLED....

  • permalink
  • fedilink
  • source
  • parent