8
Single ended signal transmission (lemmy.world)
submitted 7 months ago by to c/askelectronics@discuss.tchncs.de
7 comments fedilink hide all child comments
 

Hi,

I am thinking about the best way to transmit 5 single ended signals from one board to another as well as ground and 2 power rails. I was thinking cat5e cable with a standard rj45 plug but as cat5e is twisted pair I'm concerned about crosstalk.

The cable between the two boards would be a maximum of 50cm. 3 of the signals are addresses for a multiplexer that would change at a maximum speed of 2ms per change. One of the other signals is a 20khz pwm signal. The final signal is a zc detector for mains so max Freq of 100/120hz.

There may be high current switches at ac line frequency (50/60hz) near by.

Would single ended transmission with cat5e cable be okay for this or would I need differential signalling? If I need differential signalling, what sort of cable/connector could I use?

Any help is appreciated

Thanks

you are viewing a single comment's thread
view the rest of the comments
[–] 1 point 7 months ago* (last edited 7 months ago) (1 child)

Hi there,

i'm quite new to all of this, but i found this guy who has soem interesting info regarding grouding/coupling in designs.

Because you said any help is appreciated, maybe you're interested. Basically Hans Rosenberg has a 4 part yt lecture as a teaser to his free 9 part minicourse. His free minicourse is "Module 1" of his paid full course.

In his 4 part teaser he also throws in an example for digital signals

  • permalink
  • fedilink
  • source
  • hideshow 2 child comments
    •