945
Valve: HDMI Forum Continues to Block HDMI 2.1 for Linux (www.heise.de)
submitted 8 months ago by to c/technology@lemmy.world
255 comments fedilink hide all child comments
 

The HDMI Forum, responsible for the HDMI specification, continues to stonewall open source. Valve's Steam Machine theoretically supports HDMI 2.1, but the mini-PC is software-limited to HDMI 2.0. As a result, more than 60 frames per second at 4K resolution are only possible with limitations.

you are viewing a single comment's thread
view the rest of the comments
[–] 4 points 8 months ago* (last edited 8 months ago) (1 child)

Can't be a passive adapter or else that would mean DisplayPort and HDMI have to protocol compatible. If they were then we wouldn't have this issue. Apparently I was wrong.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 13 points 8 months ago

    Nope. DisplayPort can adapt to HDMI or DVI passively. It won’t support the proprietary bullshit like HDCP, but it will be able to display video just fine. Pin 13 on DP is specifically used to detect adapters, so the output device can automatically change to using an HDMI protocol if it detects an HDMI adapter. This technically requires a dual-mode DP port to automatically adapt, but the vast majority of DP connectors produced in the past several years are dual-mode.

    But going the other direction (HDMI to DP) requires an active adapter, to strip out all of the proprietary HDMI-only bullshit.

  • permalink
  • fedilink
  • source
  • parent