359
This section of mirror doesn't fog (lemmy.world)
submitted 10 months ago by [M] to c/mildlyinteresting@lemmy.world
123 comments fedilink hide all child comments
 
you are viewing a single comment's thread
view the rest of the comments
[–] 9 points 10 months ago (2 children)

Suppose you were in this situation and suspected something. I’d imagine the space behind it would be totally dark, so what would be a safe way to check if there’s a gap in between without breaking the glass?

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 4 child comments
    •
  • [–] 26 points 10 months ago (1 child)

    there are no "one-way" mirrors. You just need to make your side darker than the other side (there's a reason the observation side of a two-way mirror is never brightly lit, but the interrogation room is)

    Tldr: put your face right up against it and use your hands to block out as much light as you can

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] -1 points 10 months ago (2 children)

    there are no “one-way” mirrors. You just need to make your side darker than the other side

    15 upvotes? Really? Mirrors are painted on the back with opaque paint.

    Are we cross posting this to a flat earth science forum?

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 4 child comments
    •
  • [–] 8 points 10 months ago* (last edited 10 months ago) (4 children)

    I read a long time ago that putting something flat against the mirror will show you. I think if the mirror is legit you’ll see the reflection directly on the surface, if it’s two way the reflection will look like it’s inside the glass.

    But I’ve never had the chance to actually test that, so take it with a grain of salt.

    Edit: Turns out this is incorrect; thanks to everyone for educating me!

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 8 child comments
    •
  • [–] 24 points 10 months ago (2 children)

    You want there to appear a "space" between your fingertip and the mirror, if touching it directly. If there's no space, then say cheese.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 4 child comments
    •
  • [–] 5 points 10 months ago (1 child)

    If you’re touching, someone’s watching.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 15 points 10 months ago* (1 child)

    This is ancient advice for two-way mirrors, IIRC nowadays even legit mirrors can reflect directly from the front instead of the back. In this age of spy cameras this is mostly irrelevant.

    Another tip was shining a bright light to illuminate the supposedly dark room on the other side, which again, would be way more expensive than a smoke detector spy camera.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 5 points 10 months ago

    Yes, darkening your room and then pushing a bright light up against the one-way, taking care to not have it leak into your room, should make the other room brighter so you can see it.

    Not that this is a one-way mirror anyway.

  • permalink
  • fedilink
  • source
  • parent
  • [–] 15 points 10 months ago (1 child)

    It would be the other way around, if at all.

    "First-surface" mirrors where the reflective layer is on the front of the glass are quite fragile, so wouldn't typically used for residential applications (you'd remove the reflective coating by cleaning it).

    A regular mirror has the reflective surface on the back of the glass (which is then is further coated with a protective paint), leading to the effect you describe.

    I don't however know enough to say one way or the other whether a surveillance mirror would becessarily be a first-surface mirror.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 5 points 10 months ago

    think if the mirror is legit you’ll see the reflection directly on the surface, if it’s two way the reflection will look like it’s inside the glass.

    scientific use mirrors are front mirrors, the metal is deposited on the outer surface. They are delicate and difficult to clean.

    Every household mirror is rear coated, and then painted to protect the metal from oxidation.

  • permalink
  • fedilink
  • source
  • parent