234
Replaced my electric resistance water heater with heat pump, dramatic reduction in energy usage (lemmy.world)
submitted 1 year ago by to c/homeimprovement@lemmy.world
35 comments fedilink hide all child comments
 

cross-posted from: https://lemmy.world/post/34021020

I recently installed an Emporia Vue with monitoring for the individual circuit my water heater is on. It captured the very significant difference in energy usage from replacing resistive heat with heat pump.

you are viewing a single comment's thread
view the rest of the comments
[–] 1 point 1 year ago (1 child)

For areas where you want to cool or dehumidify the air these help though. So where I live, during the summer these would effectively be "free" - you were going to use that energy to cool the house anyway with your AC, now you've just put that heat in water instead.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 1 point 1 year ago (1 child)

    You can also connect it through the wall so that it uses outside air for its energy. Modern heat pump technology is so good it can remain effective all the way down to -25C.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 1 point 1 year ago (1 child)

    While that is true of heat pump technology in total, I have not seen any heat pump water heaters in the US that work below freezing. One example: my Rheem manual says it will work down to about 42F / 5C. Below that, it uses resistive heating elements.

    But I'm sure it's coming eventually to water heaters.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 1 point 1 year ago

    Yeah, I seem to be mistaken and you are right, -25 is accurate for heat pumps for room heating. But the Nibe F110 is a heat pump water heater that works down to -10C, and Indol have a few models that says down to -12C. Still quite good!

  • permalink
  • fedilink
  • source
  • parent