Hi Im also a student but with a very a small budget. I figured I'd share some of the very cheap chinese boards Ive found. Cheap means some disadvantages ofcourse. Purchased one of these recently.
- The first are boards with Altera's Cyclone IV on them. Boards with the EP4CE6 (6K LEs) and EP4CE10 (10K LEs) can be found on AliExpress.
Cyclone IV is supported by Quartus Lite so dev tools will be free. For the fpga itself Intel has documentation but for the peripherals on the board (if its a more fully-featured board) you either rely on the seller sending you pin numbers or finding it online documented by others.
I got one with EP4CE6 (no VGA jack or other bells and whistles, just some LEDs and buttons) for what comes out as 10 euros or so. There are others that resemble proper dev boards (with connectors and stuff like 7-segment displays) costing something like 25 euros.
- There are also Sipeed Tang FPGA boards. They use Gowin FPGAs and Gowin's IDE is free. The Tang Nano 9k has been shown to run the PicoRV32 RISC-V core. It costs 15 euro on Aliexpress. The downside is that Gowin tools ofcourse wont be as good as Intel's Quartus.
Also interesting to note that the Tang Nano 4K has a Cortex M3 on it so I think it counts as an Fpga-Soc? I think its fun and might get one some time.