11
SSD Drive Problem (lemmy.world)
submitted 1 year ago by to c/linux@lemmy.world
14 comments fedilink hide all child comments
 

I have a new WD Blue 1TB ssd hard drive that doesn't want to get formatted or mounted. When I attach the drive via USB I get an error message of:

Unable to Mount 1.0 Tb volume
An operation is already pending

Eventually I get:

Unable to Mount 1.0 Tb volume
timeout was reached

I have a Lenovo Thinkpad T570 running Linux Mint 22.1 Xia base. "GParted" and "Disks" don't see the drive. Is there something I can do to access the disc or is it toast?

you are viewing a single comment's thread
view the rest of the comments
[–] 6 points 1 year ago (1 child)

Better yet, run sudo dmesg --follow beforehand, and watch the output there while plugging it in.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] [S] 1 point 1 year ago (1 child)

    So far it is showing

    usb 2-4: new SuperSpeed USB device number 11 using xhci_hcd [211819.412449] usb 2-4: New USB device found, idVendor=2537, idProduct=1068, bcdDevice= 1.00 [211819.412468] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [211819.412477] usb 2-4: Product: NS1068 [211819.412484] usb 2-4: Manufacturer: Norelsys [211819.412491] usb 2-4: SerialNumber: 0123456789ABCDE [211819.415262] usb-storage 2-4:1.0: USB Mass Storage device detected [211819.415608] usb-storage 2-4:1.0: Quirks match for vid 2537 pid 1068: 800000 [211819.415722] scsi host1: usb-storage 2-4:1.0 [211821.975537] scsi 1:0:0:0: Direct-Access ATA WD Blue SA510 2. 0100 PQ: 0 ANSI: 6 [211821.976781] sd 1:0:0:0: Attached scsi generic sg1 type 0 [211821.985294] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [211821.985686] sd 1:0:0:0: [sdb] Write Protect is off [211821.985704] sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00 [211821.986069] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [211822.033052] sdb: sdb1 [211822.034239] sd 1:0:0:0: [sdb] Attached SCSI disk [211851.555550] usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd [211877.091031] usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd [211902.626842] usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] [S] 1 point 1 year ago (1 child)

    Some more

                              usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd

    [211953.700655] usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd [211979.236790] usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd [211979.249917] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=152s [211979.249940] sd 1:0:0:0: [sdb] tag#0 CDB: Write(10) 2a 00 00 00 08 00 00 00 08 00 [211979.249950] blk_print_req_error: 752 callbacks suppressed [211979.249959] I/O error, dev sdb, sector 2048 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [211979.249982] buffer_io_error: 21278 callbacks suppressed [211979.249988] Buffer I/O error on dev sdb1, logical block 0, lost async page write [212004.768420] usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd [212030.306531] usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 5 points 1 year ago (1 child)

    I/O errors, nice. What kind of disk is this? Removable USB case? Fixed one? Are you able to test the disk in another case or directly plugged into a mainboard?

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] [S] 1 point 1 year ago* (last edited 1 year ago) (1 child)

    WD Blue SSD drive in a removable case. I'll try it another machine.

    Same issue on a different machine :-(

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •